Drip Kit Parts
Drip Kits are very easy to assemble. Below we have made as detailed a tutorial as possible to help you assemble one. Enjoy!
Below are the parts that you’ll typically find in a drip kit purchased from GrowersSolution.com.
11 Steps to the Drip System of your Dreams!
Hand modeling by Mike G.
Photography by “Growers Learning Studios”.
Step 1: Attach the Pressure Regulator(left) to the hose fitting adaptor(right).
Step 2: Attach the items from Step1 to the tubing(not to the drip tape itself!)
Step 3: Remember to tighten the nut down onto the tubing for a secure connection.
Step 4: Use the included hole punch to punch holes along the tubing where you want the drip tape to be attached
Step 5: Insert your Shutoff Valves into the holes made in Step 4.
Step 5(cont.) Make sure that the barb is fully inserted and locked in.
Step 6: Insert Drip Tape onto the other end of the Shutoff Valve and tighten the nut down onto the tape.
Step 7: Cut a small piece of tape off the end of the Drip Tape
Step 8: Fold the end of the Drip Tape over itself twice
Step 9: Roll the folded Drip Tape slightly and insert it into the piece of Drip Tape cut off in Step 7
Step 10: Slide the Figure Eight onto the end of the Tubing
Step 11: Fold Tubing over and insert into the other end of the Figure Eight
Step 11(cont.) Finished end