When irrigating upside-down in greenhouses or net-houses or
tunnels, SpinNet™ bridgeless micro-sprinklers give you uniform water
distribution and no drip-off, for perfectly uniform crop yields.
HIGH UNIFORMITY AND GERMINATION RATES: The uniform droplets
are perfectly sized and distributed to guarantee effective germination.
SELF-CLANING: “Vibration” mechanism prevents build-up of
mineral deposits in the nozzle – reducing need for maintenance and repairs.
HARD-WEARING: Micro-emitters are made from materials
resistant to abrasive agrochemicals and harsh weather conditions.
SpinNet™ micro-sprinklers are constructed without a
"bridge" to retain the spinner, producing a drip-less operation. This
means that plants located below the sprinklers are not damaged from water
dripping off the sprinkler. SpinNet™ hangs below the supply pipe preventing
wetting of the pipe and dripping onto the plants below.
Interchangeable components. SpinNet™ micro-sprinklers can be
disassembled by hand should they need cleaning - no tools are required.
Acid resistant (AA) raw materials, thus allowing the application
chemicals to pass through the system. The system can be cleaned by application
of suitable acid treatments.
Excellent uniformity distribution on a full coverage
Strongly recommended to connect the SpinNet™ to the
distribution pipe with a SSPE (super soft PE) micro-tube, a specifically
designed stabilizer and AD valve (anti-drain) that will prevent distribution
Micro-sprinkler, 6 different flow rates: 50, 70, 90, 120,
160, 200 l/h. Nominal flow rates at 2.3 bar pressure.
Recommended working pressure: 2.0 up to 3.0 bar.
Recommended filtration : 130 micron / 120 mesh. Filtration
method is to be selected based on the kind and concentration of the dirt
particles existing in the water. Wherever sand exceeding 2 ppm exists in the
water, a Hydro-cyclone filter is to be installed before the main filter. When
sand/ silt/ clay solids exceed 100 ppm, pretreatment will be applied according
to Netafim™ expert team's instructions.
Inlet connector: Press fit.
3 different rotors: LR - High trajectory, colored Green FLT
- Flat distributor, colored Gray SR - Low trajectory , colored Blue
Customer Ratings & Reviews
Be the first to rate this item!