Tenn-Air Tennis Wind Screen
M. Putterman is a leading manufacturer of custom tennis windscreens for outdoor tennis courts, tennis curtains and divider nets for indoor courts and tennis nets. We use our patented TennAir materials for our wind screens; it is durable and built to last. We offer many colors and custom logo imprints customized for your facility or event.
Tenn-Air stands up better than any other to wind, sun, humidity, sand, dirt, abrasion and cold. A unique PVC vinyl coated polyester, Tenn-Air is backed by a THREE YEAR WARRANTY and these features are included at NO CHARGE: air vents every 10’, grommets every 12", reinforced hems and custom sizes.
Tenn-Air can’t be beat around tennis courts, to enclose swimming pools, for backyard/commercial privacy, along ski slopes or ice rinks, as a canopy, along highways for debris/snow control, to disguise any eyesore and as a shade screen to stop glare. Tenn-Air is available in a variety of colors and is the most popular choice of tennis, recreation, resort and park facilities around the world. THERE IS NO EQUAL!
TENN-6
TENN-AIR vinyl coated polyester windscreen, 6’ tall. Considered by many world class facilities to be the finest outdoor tennis backdrop anywhere. Three year warranty. Custom sizes, air vents, included at no extra charge.
TENN-9
TENN-AIR windscreen, same as above, except 9’ tall with center reinforced grommeted seam.
TENN-CLO
TENN-AIR - Same as TENN-6 except a more dense, closed mesh. Available in 6’ or 9’ heights.
Materials
- Fabric: the fabric furnished shall be woven from 3.0 ounce per square yard polyester material and coated after weaving weather 6.0 ounce per square yard coating of dark poly vinyl chloride coating, for a total weight of 9.0 ounces per square yard. Color shall be special green per color chip DC-61P.
- Tensile strength when tested per the grab method shall be 230 x 200 pounds and when tested by the strip method, shall be 200 x 140 pounds.
- Coating: the weather protective coating system shall be formulated to comply with the following minimum test performance standards:
| Property |
Test Method |
Specification |
| Water Absorption |
ASTM-D-471 7 days @ 160 degrees F |
5.0% maximum weight gain |
| Plasticizer Extraction by Water |
ASTM-D-1239 Modified |
6.0% maximum weight loss |
| Wicking |
PUTTERMAN Procedure: 24 hours Room Temperature |
1/8" Maximum |
| Weathering |
Carbon-Arc ASTM-D-750 2500 hours minimum |
No appreciable change in color, no cracking or crazing |
Fabrication
- Hems and Seams: All hems shall be four-ply reinforced with heavy duty 1 oz. vinyl coated nylon. Windscreens 9’ high shall have a center seam with internal reinforcement as above. All hems and seams are to be sewn with #7 weather and ultraviolet light resistant dacron thread.
- Grommets: Grommets shall be of brass material spaced at a maximum of 12" apart on all hems. A 9’ high windscreen center seam shall have grommets as above.
- Air vents: Die cut air vents shall be placed a maximum of 10’ apart
Measuring your Fence for Windscreen
- Make sure you begin at a terminal post (corner) and continue to the next terminal post. DO NOT HOLD YOUR TAPE UP TO THE FENCE. This will create a slack which could cause your windscreen to be too long.
- Measure inside tension bar to inside tension bar. You may disregard line posts (unless they are courtside). For ease of handling, remember that windscreen sections should not be more than 60 or 70 feet. EXACT MEASUREMENTS ARE NECESSARY (including feet and inches). Do not guess and do not round off inches to feet (either larger or smaller), NO TWO FENCES ARE IDENTICAL.
Available in your choice of colors:
|
 Dark Green
|
 Green
|
 Royal Blue
|
 Navy
|
|
 Red
|
 Orange
|
 Brown
|
 Yellow
|
|
 Black
|
 Grey
|
 White
|
|