Poly Pro Tennis Wind Screen
	Quantity in Basket:none Code: PolyPro Price:Based on Selection.
	Quantity:
Poly Pro Tennis Wind Screen M. Putterman is a leading manufacturer of custom tennis windscreens for outdoor tennis courts, tennis curtains and divider nets for indoor courts and tennis nets. We use our patented TennAir materials for our wind screens; it is durable and built to last. We offer many colors and custom logo imprints customized for your facility or event. POLY-6 Polypropylene windscreen, 6’ tall. Recommended to match existing polypropylene screens for short term use. Custom sizes. Air vents are extra. POLY-9 Polypropylene windscreen, same as above, except 9’ tall with center reinforced grommeted seam. Materials Fabric: the fabric furnished shall be woven from 3.0 ounce per square yard polyester material and coated after weaving weather 6.0 ounce per square yard coating of dark poly vinyl chloride coating, for a total weight of 9.0 ounces per square yard. Color shall be special green per color chip DC-61P. Tensile strength when tested per the grab method shall be 230 x 200 pounds and when tested by the strip method, shall be 200 x 140 pounds. Coating: the weather protective coating system shall be formulated to comply with the following minimum test performance standards: Property Test Method Specification Water Absorption ASTM-D-471 7 days @ 160 degrees F 5.0% maximum weight gain Plasticizer Extraction by Water ASTM-D-1239 Modified 6.0% maximum weight loss Wicking PUTTERMAN Procedure: 24 hours Room Temperature 1/8" Maximum Weathering Carbon-Arc ASTM-D-750 2500 hours minimum No appreciable change in color, no cracking or crazing Fabrication Hems and Seams: All hems shall be four-ply reinforced with heavy duty 1 oz. vinyl coated nylon. Windscreens 9’ high shall have a center seam with internal reinforcement as above. All hems and seams are to be sewn with #7 weather and ultraviolet light resistant dacron thread. Grommets: Grommets shall be of brass material spaced at a maximum of 12" apart on all hems. A 9’ high windscreen center seam shall have grommets as above. Air vents: Die cut air vents shall be placed a maximum of 10’ apart Measuring your Fence for Windscreen Make sure you begin at a terminal post (corner) and continue to the next terminal post. DO NOT HOLD YOUR TAPE UP TO THE FENCE. This will create a slack which could cause your windscreen to be too long. Measure inside tension bar to inside tension bar. You may disregard line posts (unless they are courtside). For ease of handling, remember that windscreen sections should not be more than 60 or 70 feet. EXACT MEASUREMENTS ARE NECESSARY (including feet and inches). Do not guess and do not round off inches to feet (either larger or smaller), NO TWO FENCES ARE IDENTICAL. Available in your choice of colors: Dark Green Green Royal Blue Navy Red Orange Brown Yellow Black Grey White