Victor Out O'Sight Mole Trap - 2 traps

Are moles ruining your beautiful lawn? Has it become hazardous to walk in your yard due to the burrowed out areas under the grass? You might never see them, but they scuttle below, digging, tunneling surface runs (ouch! ankle twists!), excavating deeper galleries. Say "Good-by" to your moles when you say, "Hello" to Victor Out O' Sight Mole Trap!

Technical Specifications

Additional Information

Out-of-Sight Mole Instructions for Mole Traps
Where to Place the Trap:
The presence of moles will be indicated by mounds of soil created as they construct their tunnels. To locate tunnels in frequent use, clear away a mound of soil and probe for the opening, usually a short passage that leads down a few inches to the main tunnel. Place mole traps in this tunnel.
How to Place the Mole Traps:
First, dig a hole down to the main tunnel. Make certain that the hole is no larger than the mole trap and that it is aligned with a straight section of the tunnel. Then build a mound in the center of the hole using loose soil. Next, place mole traps in the hole, pushing down firmly until it rests on mound. Fill in tunnel entrances with soil. Finally, release the safety hook. NOTE: Place a box or board over the trap to avoid danger to children and animals
How to Set the Mole Traps:
Place setting levers on mole traps' spring as shown. Then carefully draw setting levers together. This will require some strength. When the levers are fully compressed, place end of locking bar on trigger pan. Temporarily set the safety hook around top of other mole trap leg. Next, remove setting levers and place mole traps in mole runway. Finally, release safety hook only when trap is properly positioned. NOTE: To reduce sensitivity and increase trigger tension, bend trigger pan slightly with pliers. CAUTION should be taken when setting this product so that injury does not occur. Keep out of the reach of children.